This guide will demonstrate three different methods to power your relay and extended relay modules.
1. Utilize the BEVRLink Power Supply Unit (PSU) that matches the voltage requirements of your selected relay board. This ensures optimal and stable power delivery to your system. You should NOT use the USB-C port to supply power to the Raspberry Pi in addition to the BEVRLink PSU. Ensure all power is provided through the BEVRLink PSU to avoid potential conflicts.
2. Utilize the BEVRLink Power Supply Unit (PSU) that matches the voltage requirements of your selected relay board. You can use any of the BEVRLink extension relay modules to add more relays. For addressing of the standard relays in this setup follow this guide.
Below is the setup demonstrating the same configuration, now incorporating the BEVRLink extension cable for enhanced connectivity and flexibility.
