Get Started With BEVRLink 4 Relay + 4 Buttons with inbuilt ESP32 - ESPHome

Get Started With BEVRLink 4 Relay + 4 Buttons with inbuilt ESP32 - ESPHome

The example below is only one way how to set up the Relay Module giving examples for both with and without buttons. The BEVRLink Relay 4 with inbuilt ESP32 12V use the ESP32-C6 module with WiFi, Bl...
Example of Zigbee on BEVRLink ESP32 boards

Example of Zigbee on BEVRLink ESP32 boards

The example below is only one way how to set up the Relay Module The BEVRLink Relay 4 with inbuilt ESP32 12V  use the ESP32-C6 module with WiFi, Bluetooth and Zigbee/Matter support. Here we will gi...
Getting Started with Home Assistant Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

Getting Started with Home Assistant Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

For this tutorial we have connected a Raspberry Pi 5 to the BEVRLink Raspberry Pi 5 8 Channel Relay 12V. With this relay module board you need the BEVRLink Power Supply 12V 2A.  This guide works f...
Web based BEVRLink relay control using Raspberry Pi and Bottle.py

Web based BEVRLink relay control using Raspberry Pi and Bottle.py

For this we have connected a Raspberry Pi 5 to the BEVRLink Raspberry Pi 5 8 Channel Relay 12V. With this relay module board you need the BEVRLink Power Supply 12V 2A. As addional boards BEVRLink 8...
Getting Started with C++ Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

Getting Started with C++ Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

For this tutorial we have connected a Raspberry Pi 5 to the BEVRLink Raspberry Pi 5 8 Channel Relay 12V. With this relay module board you need the BEVRLink Power Supply 12V 2A.  This guide works f...
Getting Started with Bash Commands Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

Getting Started with Bash Commands Using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

If you’re looking to control devices with your Raspberry Pi inside bash or with scripts using the BEVRLink 4/8-Channel Relay Hat, you can use the pinctrl tool to interact with GPIO pins effectively...
Getting Started with Node-RED using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

Getting Started with Node-RED using BEVRLink 4/8-Channel Relay Hat for Raspberry Pi

Welcome to our guide on getting started with Node-RED using the BEVRLink 4/8-Channel Relay HAT for Raspberry Pi! This tutorial will walk you through the process of setting up and configuring your R...
Get Started With BEVRLink 4 Relay + 4 Buttons with inbuilt ESP32 - Arduino

Get Started With BEVRLink 4 Relay + 4 Buttons with inbuilt ESP32 - Arduino

The example below is only one way how to set up the Relay Module giving examples for both with and without buttons. The BEVRLink Relay 4 with inbuilt ESP32 12V use the ESP32-C6 module with WiFi, B...
Get Started With BEVRLink Raspberry Pi 5 4/8 Channel Relay - Python

Get Started With BEVRLink Raspberry Pi 5 4/8 Channel Relay - Python

The example below is only one way how to set up the Relay Module.In this examples we have connected a Raspberry Pi 5 to the BEVRLink Raspberry Pi 5 8 Channel Relay 12V. With this relay module board...